Freeze Master

The Freeze Master is easy to use. Just connect the purpose designed freeze heads to the pipe work, upstream and downstream quickly and efficiently, saving water.
Freeze Master will freeze any size of pipe from 8mm to 61mm. It will freeze copper, iron, lead or plastic pipes.
The Freeze Master is safe to use. You can leave the machine unattended, and as long as it is connected to the mains, the freeze will continue indefinitely. Unlike a gas freezing method, where a cylinder may run out, with Freezemaster there is no danger of ice melting and flooding.
The Freeze Master is not just an alternative to draining down. It represents a fast, clean, efficient and highly professional new service for you to offer your customers. And as experience has proved, it is a service they are willing to pay for. How it works: At the heart of every Freeze Master is a unique microprocessor electronic control unit (Active Capillary). A state of- the-art innovation designed developed and patented. The compressor achieves lower head pressures resulting in enhanced cooling and ultra rapid pull down temperatures. Only genuine Freeze Master machines incorporate this electronic valve control system.
Active Capillary (With the Freeze Master valve control). You can freeze a warm pipe, whilst at the same time freezing a cold pipe, without the risk of a concentration of refrigerant in the freeze head attached to the coolest pipe. You can freeze a large and a small pipe with the same benefit. Taking control. The electronic valve system takes the place of the simple basic capillary and works by delivering pre-programmed quantities of refrigerant to the freeze heads. This presents several advantages unique to Freeze Master as refrigerant is electronically distributed maintaining a more stable freeze.
Without Freeze Master control unit (Basic Capillary). When a freeze head is attached to a warm pipe the Pressure within the freeze head is greater than that attached to a cooler pipe. Refrigerant will tend to precipitate in the head attached to the coolest pipe. This is detrimental to the freezing effect of the head attached to the warmer pipe.

Flotec Kit
The Freeze Master Flotec Kit is designed to take all the guesswork out of pipe freezing. It indicates if water is moving when attempting to freeze it. The Flotec Kit has two digital temperature probes which you attach to the pipe on either side of a freeze head. If the water is moving slowly through the freeze point it will cool. This will register on the down stream probe as a lower reading than the upstream probe.

Freezemaster… Pipe Freezing that works up to 88mm and Fast

The 610D is made to make building maintenance easy. Fitted with two high capacity freeze heads and supplied with pipe size reducers to freeze pipes from 8mm up to 61mm (or up to 3" steel pipe using the 610Upgrade kit).
You can effectively hold back the water supply to a pipe by attaching both freeze heads to one section, creating a single, large ice plug, or create 2 separate Ice Plugs.
Naturally, a machine that helps you complete jobs of this size, rapidly, safely and efficiently will soon repay your initial investment. Included is the 610Upgrade. This kit adapts 610 machines to freeze 21/2" & 3" ID Steel pipes (76mm & 88mm OD). It is supplied in a neat carry case and comprises 2 x 21/2" and 2 x 31' adaptors, 2 x towel wraps, tube of freeze cream and clamp.
The Freeze Master starts to earn its keep the very first time you use it. As many professionals have testified, customers areready to pay for the use of a machine which is this efficient, safe and clean, and where no drain down or refilling of the water system is required.

Top