DON'T WASTE WATER

No-Drain-T Connector

The No Drain-T connector has been developed specifically for the purpose of live tapping, and engineered to provide a branch Tee, without an inline valve. The tee has unique features that allow it to be flush fitted to existing sprinkler main pipe work.

How Does It Work?

The LIVETAP® drilling system, allows the installer to fit a branch tee connection, to existing 80 mm, 100mm and 150 mm fire sprinkler mains.

1. The new No Drain-T connector is first installed in a suitable location on an existing fire sprinkler main.
   
   
2. On completion of a successful test, the pressure is reduced in line with the working pressure of the existing system, and the LIVETAP ® drill is connected to the No Drain-T 50 mm valve.
   
   
3. Fill the Pipe work and carry out a pressure test. Release the pressure from the system
   
   
4. The LIVETAP ® drill is fed through the No Drain-T by means of operating a simple hand operated ratchet drive, which feeds the drill into the existing fire main in a matter of minutes. The drill is now withdrawn & the metal coupon removed by means of special Drill Magnet
   
   

The work is now complete - Simplicity itself