Portalevel - The Ultimate Portable CO2-Hanlon-FM2000 Liquid Level Indicator

Testing of Gaseous Fire Systems Just Got Easier

The PORTALEVEL™ ultrasonic Liquid level indicator is designed to assist the fire technician to check levels of CO2, Hanlon Fm200™, NAF S III and other Halon replacements liquid of gaseous extinguishants quickly and simply, without weighing or hazardous radioactive technology.
Identifies liquid levels in cylinders, and single-skinned holding vessels up to 1" (25mm) wall thickness.
No Health and Safety at Work. No operational shutdowns.
Over 10,000 units in service in 92 countries worldwide.
Manufactured to ISO 9001 standards, US MIL-STD.
Magnetic Sensor applicator for hand-free operation.
Extension rod for 2-3-4 multi-banked cylinder rows.
Touch button automatic calibration Accuracy +1.5mm
Special power boosts for poor condition cylinders.
Supplied ready to use complete with carrying case, sensor, magnetic applicator and gel.
Supplied ready to use complete with carrying case, sensor, magnetic applicator and gel.
Application: Industrial CO2, Halon, Halon replacement fire protection system,
Offshore platform dispersed banked systems, marine multi-banked systems, engine room and other power generating protection systems.

Keep Your Back Intact! Don't Lift Cylinders
... Use...

Portalevel

Gaseous Fire Suppression System- Cylinder Contents Testing

Prior to the invention of the Portalevel™, the only way for the fire engineer to verify the levels liquid gaseous extinguishants in cylinders was to shut down, dismantle and weigh the cylinders, a very time consuming procedure and potentially damaging to the connections. The Portalevel™ was designed specifically for fire technicians to simplify this task.
The Portalevel™ is a versatile instrument that can locate the level of any liquid in any single skinned container of wall thickness 2-15mm. Wall thickness of 15mm- 50mm is also possible, depending on material type and vessel size. It can monitor levels in large bulk storage tanks of FM20OTM, Halons, NAF S Ill, FE 13, CEA 410 and other extinguishing systems. The Portalevel™ is available in digital.
The unit is simple to operate using push button controls and requires little or no training. It is calibrated to each cylinder at the touch of a button. The ultrasonic "dry" sensor requires no water or gel to ensure good transmission of the ultrasonic signal; the optional "wet" sensor to be used with ultrasonic gel, is suitable for use on poor condition cylinders where thick or irregular coatings or badly pitted and rusty surfaces prevent the dry sensor from obtaining a clear signal. The sensors are housed in a magnetic applicator, which ensures good contact with the surface and allows hands-free operation.
Marine, Naval and Offshore - Ships typically carry multi-banked rows of, extinguishant cylinders, which are particularly difficult to access and check. For this reason, we developed the "Portamarine"' which is the Portalevel TM, specifically packaged for the marine sector and includes a multi-bank cylinder rod which enables the engineer to check the second and third cylinder rows in situ.

The Portalevel is supplied with the following

• 1 x Portalevel™ unit
• 1 x Standard Dry Sensor and Applicator
• 1 x Tube of Ultrasonic Couplant (Gel)
• 4 x 1. 5v DC ‘AA' Batteries
• 1 x Plastic Carrying Case
• 1 x Operating Instructions
• 1 x Calibration Certificate
Dimensions: 155mm x 95mm x 45mm, Weight: 50
Optional Accessories
Multi Bank Extension Rod, Portatemp Thermometer, Wet

Top